CF PRO 12
Previous
Next
The new generation of dry screeds for residential and office buildings
The cf PRO 12 fiber cement board is a conductive layer for underfloor heating in dry construction. The flat panels are laid floating, are suitable for almost any type of flooring and enable a highly responsive underfloor heating system. Low installation height, low inertia, hoigh heat output and suitability for any flooring – these are the benefits of an underfloor heating with cf PRO 12.
- Dry installation – simple laying, glued profiled fold connection
- Thin and robust – only 12 mm installation height with 3.0 kN load capacity
- Flexibility in flooring – any flooring, also tiles up to 60 x 60 cm or 100 x 100 cm with additional glass fabrics
Castlebutsch systems GmbH Christian Lueders 36, St. Dminka Street, Victoria, VCt 9030,
Malta – EU
E: cl@castlebutsch.com
P: 00356-79059697
VAT-ID: MT23208819
Registration Nr. C 66839
Tax No.: 996972937
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Thermal conductive layer as dry screed substitute based on cement
Layered structure: Drywall floor heating, cf PRO 12, Flooring
Thermal output
| Thermal output on the basis of DIN EN 1264 Average heating water temperature θm = 35°C Spread σ = 5 K | Floor heating (e.g. System IDEAL) Installation gap = 250 mm | Floor heating (e.g. System IDEAL) Installation gap = 125 mm | ||||
| Room temperature θi = 20°C | Room temperature θi = 24°C | Room temperature θi = 20°C | Room temperature θi = 24°C | |||
| Tiles (Rλ,B = 0.00 m²K/W) | 66.9 W/m² | 48.7 W/m² | 87.8 W/m² | 63.8 W/m² | ||
| Parquet, Laminate, Design flooring (Rλ,B = 0.05 m²K/W) | 52.4 W/m² | 38.1 W/m² | 65.3 W/m² | 47.5 W/m² | ||
| Carpet (Rλ,B = 0.10 m²K/W) | 43.1 W/m² | 31.3 W/m² | 52.0 W/m² | 37.8 W/m² | ||
| Velour, Ready-to-lay parquet (Rλ,B = 0.15 m²K/W) | ||||||
Cooling capacity
| Cooling capacity on the basis of DIN EN 1264 Average cooling water temperature θm = 18°C Spread σ = 3 K | Floor heating (e.g. System IDEAL) Installation gap = 250 mm | Floor heating (e.g. System IDEAL) Installation gap = 125 mm | ||||
| Room temperature θi = 24°C | Room temperature θi = 26°C | Room temperature θi = 24°C | Room temperature θi = 26°C | |||
| Tiles (Rλ,B = 0.00 m²K/W) | 19.8 W/m² | 26.6 W/m² | 24.4 W/m² | 32.9 W/m² | ||
| Parquet, Laminate, Design flooring (Rλ,B = 0.05 m²K/W) | 16.4 W/m² | 22.0 W/m² | 19.7 W/m² | 26.5 W/m² | ||
| Carpet (Rλ,B = 0.10 m²K/W) | 14.0 W/m² | 18.8 W/m² | 16.5 W/m² | 22.2 W/m² | ||
| Velour, Ready-to-lay parquet (Rλ,B = 0.15 m²K/W) | 12.2 W/m² | 16.4 W/m² | 14.2 W/m² | 19.1 W/m² | ||